CHAPTER 1. INTRODUCTION - TM-5-3895-371-100011
Figure 1-1. Major Components and their locations (sheet 1 of 3)
Figure 1-1. Major Components and Their Location (Sheet 2 of 3)
Figure 1-1. Major Components and Their Locations (Sheet 3 of 3)
Manhole
Spray Bar
Tabulated Data - TM-5-3895-371-100017
Table 1-1. Bituminous Distributor Body Capacities, Weights, and Dimensions
Figure 1-2. Instruction and Data Plates (Sheet 1 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 2 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 3 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 4 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 5 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 6 of 6)
CHAPTER 2. OPERATING INSTRUCTIONS
LEGEND - TM-5-3895-371-100026
Figure 2-1. Hydraulic Control (Sheet 2 of 2)
Hydraulic Reservoir and Filter
Figure 2-2. Hydraulic Reservoir and Filter
Figure 2-3. Control Value and Quadrant Control Lever Positions.
Figure 2-4. Operating Controls and Levers.
Pressure Gages and Control Valves
Preparing for Operation.
Preparing for Operation-continued
Figure 2-8. (Bottom) Spray Bar Height Adjustment.
Filing Through Fill Line
Figure 2-9. Filling Through Fill Line (1 of 2)
Figure 2-9. Filling Through Fill Line (2 of 2).
Filling Through Manhole.
Figure 2-10. Circulating in Tank.
Circulating in Tank-continued
Setting Hydrostatic Controls.
Figure 2-11. Circulating in Bar.
Figure 2-12. Spraying
Shoulder Spraying
Drawing Material In Bar Back to Tank
Hand Spraying and Pump Off
Figure 2-15. Hand Spraying and Pump Off.
Figure 2-16. After Hand Spraying or Pumping Off.
Transferring from Supply Source to Storage
Figure 2-17. Transferring from Supply Source to Storage.
Draining Circulating System and Spray Bar
Figure 2-18. Draining Circulating System and Spray Bar.
Figure 2-19. Flushing Bar, Circulating System and Tank.
Hydrostatic Drive Operation.
Table 2-1. Application Chart.
Recording Settings with Hydrostatic Drive.
Table 2-2. Hydrostatic Drive Recordings.
Figure 2-20. To Spray.
Portable Burner Control Valve and Pump Handle.
Figure 2-21. Portable Burner Assembly.
Section III. OPERATION UNDER UNUSUAL CONDITIONS
CHAPTER 3. MAINTENANCE INSTRUCTIONS
General Maintenance Procedures.
Fluid Leakage.
Table 3-1 Operator/Crew Preventive Maintenance Checks and Services
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100067
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100068
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100069
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100070
Section III - TROUBLESHOOTING
Table 3-2. Troubleshooting
SPRAY STREAKS - TM-5-3895-371-100073
SPRAY BAR DOES NOT CIRCULATE
Section IV. MAINTENANCE PROCEDURES
Figure 3-1. Fuel Tank and Cap.
Figure 3-2. Blower Air Cleaner.
Figure 3-3. Bituminous Spray Bar.
Blower Burner Fuel Line Strainer
Manhole Strainer
Figure 3-6. Discharge Header Strainer.
Burner Valve Strainer
Figure 3-8. (Bottom) Filling Line Strainer.
Hydraulic Filter
Figure 3-9. Hydraulic Filter.
APPENDIX A. REFERENCES - TM-5-3895-371-100086
APPENDIX B. COMPONENTS OF END ITEM LIST
Explanation of Columns.
Figure B-1. Basic Issue Items.
Section II. INTEGRAL COMPONENTS OF END ITEM
Section III. BASIC ISSUE ITEMS
APPENDIX C. ADDITIONAL AUTHORIZATION LIST
Section II. ADDITIONAL AUTHORIZATION LIST
APPENDIX D. EXPENDABLE SUPPLIES AND MATERIALS LIST - TM-5-3895-371-100094
Section II. EXPENDABLE SUPPLIES AND MATERIALS LIST - TM-5-3895-371-100095
Section II. EXPENDABLE SUPPLIES AND MATERIALS LIST--CONTINUED
TM-5-3895-371-10 Bituminous Distributor M918 Model D-63 Manual
Figure 1-1. Major Components and their locations (sheet 1 of 3)
Figure 1-1. Major Components and Their Location (Sheet 2 of 3)
Figure 1-1. Major Components and Their Locations (Sheet 3 of 3)
Manhole
Spray Bar
Tabulated Data - TM-5-3895-371-100017
Table 1-1. Bituminous Distributor Body Capacities, Weights, and Dimensions
Figure 1-2. Instruction and Data Plates (Sheet 1 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 2 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 3 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 4 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 5 of 6)
Figure 1-2. Instruction and Data Plates (Sheet 6 of 6)
CHAPTER 2. OPERATING INSTRUCTIONS
LEGEND - TM-5-3895-371-100026
Figure 2-1. Hydraulic Control (Sheet 2 of 2)
Hydraulic Reservoir and Filter
Figure 2-2. Hydraulic Reservoir and Filter
Figure 2-3. Control Value and Quadrant Control Lever Positions.
Figure 2-4. Operating Controls and Levers.
Pressure Gages and Control Valves
Preparing for Operation.
Preparing for Operation-continued
Figure 2-8. (Bottom) Spray Bar Height Adjustment.
Filing Through Fill Line
Figure 2-9. Filling Through Fill Line (1 of 2)
Figure 2-9. Filling Through Fill Line (2 of 2).
Filling Through Manhole.
Figure 2-10. Circulating in Tank.
Circulating in Tank-continued
Setting Hydrostatic Controls.
Figure 2-11. Circulating in Bar.
Figure 2-12. Spraying
Shoulder Spraying
Drawing Material In Bar Back to Tank
Hand Spraying and Pump Off
Figure 2-15. Hand Spraying and Pump Off.
Figure 2-16. After Hand Spraying or Pumping Off.
Transferring from Supply Source to Storage
Figure 2-17. Transferring from Supply Source to Storage.
Draining Circulating System and Spray Bar
Figure 2-18. Draining Circulating System and Spray Bar.
Figure 2-19. Flushing Bar, Circulating System and Tank.
Hydrostatic Drive Operation.
Table 2-1. Application Chart.
Recording Settings with Hydrostatic Drive.
Table 2-2. Hydrostatic Drive Recordings.
Figure 2-20. To Spray.
Portable Burner Control Valve and Pump Handle.
Figure 2-21. Portable Burner Assembly.
Section III. OPERATION UNDER UNUSUAL CONDITIONS
CHAPTER 3. MAINTENANCE INSTRUCTIONS
General Maintenance Procedures.
Fluid Leakage.
Table 3-1 Operator/Crew Preventive Maintenance Checks and Services
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100067
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100068
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100069
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services - Continued - TM-5-3895-371-100070
Section III - TROUBLESHOOTING
Table 3-2. Troubleshooting
SPRAY STREAKS - TM-5-3895-371-100073
SPRAY BAR DOES NOT CIRCULATE
Section IV. MAINTENANCE PROCEDURES
Figure 3-1. Fuel Tank and Cap.
Figure 3-2. Blower Air Cleaner.
Figure 3-3. Bituminous Spray Bar.
Blower Burner Fuel Line Strainer
Manhole Strainer
Figure 3-6. Discharge Header Strainer.
Burner Valve Strainer
Figure 3-8. (Bottom) Filling Line Strainer.
Hydraulic Filter
Figure 3-9. Hydraulic Filter.
APPENDIX A. REFERENCES - TM-5-3895-371-100086
APPENDIX B. COMPONENTS OF END ITEM LIST
Explanation of Columns.
Figure B-1. Basic Issue Items.
Section II. INTEGRAL COMPONENTS OF END ITEM
Section III. BASIC ISSUE ITEMS
APPENDIX C. ADDITIONAL AUTHORIZATION LIST
Section II. ADDITIONAL AUTHORIZATION LIST
APPENDIX D. EXPENDABLE SUPPLIES AND MATERIALS LIST - TM-5-3895-371-100094
Section II. EXPENDABLE SUPPLIES AND MATERIALS LIST - TM-5-3895-371-100095
Section II. EXPENDABLE SUPPLIES AND MATERIALS LIST--CONTINUED
TM-5-3895-371-10 Bituminous Distributor M918 Model D-63 Manual
