TM 5-3895-371-10
k.
Periodically clean the burner Remove two screws (9) and slide the shell off the burner
coil. Remove nozzle jet (10) and open the burner control valve to permit raw diesel
fuel to flush the burner. Close the burner control valve and wipe the burner coil with a
clean cloth. Replace the nozzle jet and slide the shell over the burner coil. Install and
tighten the machine screws.
I.
A few drops of lubricating oil applied to the air vent hole in the pump barrel cap will
keep the pump lubricated.
1.
HOSE
7.
BURNER CONTROL VALVE
2.
PUMP HANDLE
8.
BURNER
3.
FILLING FUNNEL
9.
SCREW
4.
PRESSURE GAGE
10.
NOZZLE JET
5.
SHOULDER STRAP
11.
CAP
6.
BURNER FUEL TANK
12.
BARREL
Figure 2-21. Portable Burner Assembly.
TA 075453
2-37
