TM 5-3895-371-10
(1)
Inspect O-ring (1), seals (2), and gasket (7) for deterioration or other damage
(2)
Inspect remaining parts for obvious damage
(3)
Discard damaged parts and obtain new replacements
c.
Installation
(1)
Place gasket (7) on center post (8) and insert center post (8) into housing (6)
(2)
Install washer (5) on center post (8)
(3)
Install spring (4) on center post (8) with the large coil end down
(4)
Install bottom seal (2) on center post (8)
(5)
Install a new filter element (3) on top seal (2) on center post (8)
(6)
Install O-ring (1) in groove on the filter head
(7)
Position housing (6) and screw center post (8) into the filter head
Figure 3-9. Hydraulic Filter.
3-23/3-24 Blank
