TM 5-3895-373-20
4.12.
REPLACE THROTTLE ACTUATOR AND THROTTLE CONTROL CABLE - Continued.
B. INSTALL Continued.
e.
Adjust hex nut (18) and washer (17) on throttle
control cable (14) to measurement recorded in
step A.2.d.
f.
Remove hex nuts (13 and 15) and washer (16)
from throttle control cable (14).
g.
Slide throttle control cable (14) through actuator
mounting bracket (12).
h.
Install washer (16) and hex nut (15). Tighten hex
nut.
i.
Install hex nut (13) onto throttle control cable
(14).
Place hex nut to measurement recorded in step A.
.b.
j.
Thread sliding block (8) onto throttle control
cable (14) up to hex nut (13). Tighten hex nut.
GO TO NEXT PAGE
4-72
