3. INSTALL BATTERY CABLES - TM-5-3895-373-20

2. CONNECT RELAY WIRES TO RELAY - TM-5-3895-373-20_611

4.12. REPLACE THROTTLE ACTUATOR AND THROTTLE CONTROL CABLE

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
604

TM 5-3895-373-20 4.11. REPLACE INDUCTION HEATER RELAY - Continued. B. INSTALL Continued. 3. INSTALL BATTERY CABLES. When connecting batteries, connect positive battery cable before connecting negative battery cable. Failure to connect batteries in the proper sequence may lead to electrical shock or short circuit and result in severe personnel injury. a. Reconnect positive battery cable (6) and battery nut (4) to positive terminal of inboard battery. b. Reconnect negative battery cable (5) and battery nut (4) to negative terminal of outboard battery. Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. c. Apply electrical insulating varnish to terminals on battery. d. Install rubber battery terminal caps (3) onto battery terminals. e. Install battery box covers (2) on both batteries and buckle battery box holddown straps (1). NOTE FOLLOW-ON-TASKS: Close rear top left access door per TM 5-3895-373-10. Install left access cover per TM 5-3895-373-10. END OF TASK 4-68

Privacy Statement
Press Release
Contact