TM 5-3895-373-20
A. REMOVE Continued.
Fuel is very flammable and can
explode easily.
To avoid serious injury or death:
Always wear safety glasses/goggles
at all times.
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Do not work on fuel system when
engine is hot; fuel can be ignited by a
hot engine.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
NOTE
Do not loosen clamp mounting screw
(2) on cylinder head end cover.
Coolant will leak from cylinder head if
screw is loosened. Fuel pipe will slide
through
clamp
without
loosening
screw.
c.
Unscrew tube coupling nut (3). Grasp fuel pipe
(4) and slide fuel pipe from induction heater (5)
and from fuel filter multiple connector (6).
d.
Remove and discard compression sleeves (7
and g).
2. REMOVE INDUCTION HEATER.
a.
Unplug lead wire electrical contact (9) from
induction heater terminal.
b.
Remove and discard used induction heater (5).
GO TO NEXT PAGE
4-63
