TM 5-3895-385-23-2
0326
Rocker Lever Assembly Installation
Figure 3. Rocker Lever Assembly -- Installation.
NOTE
Refer to tags installed during removal procedures to ensure proper positioning of rocker lever
assemblies and valve bridges.
1. Install valve bridges (Figure 3, Item 4) onto valve springs (Figure 3, Item 3).
2. Install two rocker lever assemblies (Figure 3, Item 5) onto rocker lever support (Figure 3, Item 2).
3. Install screws (Figure 3, Item 1) through rocker lever assemblies (Figure 3, Item 5) and into cylinder head
(Figure 3, Item 2) finger-tight.
4. Torque screws (Figure 3, Item 1) to 27 foot-pounds (ft-lb) (36 Newton meters (Nm)).
5. Adjust rocker lever assembly (perform Rocker Lever Assembly Adjustment task).
END OF TASK
