TM 5-3895-385-23-2
0326
ROCKER LEVER ASSEMBLY REMOVAL, INSTALLATION, AND ADJUSTMENT
Rocker Lever Assembly Removal
Figure 1. Rocker Lever Assembly -- Release Spring Tension.
CAUTION
Several of the rocker lever assemblies will be under spring tension prior to removal. Release the
spring tension on the rocker lever assemblies before loosening the mounting screws. If tension is
not released, push rods, rocker levers, and rocker lever supports may be damaged during
removal. Failure to comply may cause damage to equipment.
NOTE
The procedure to release spring tension on rocker lever assemblies is the same for all rocker
lever assemblies.
1. Loosen locking nut (Figure 1, Item 2) on adjusting screw (Figure 1, Item 1).
2. Turn adjusting screw (Figure 1, Item 1) until it stops to release spring tension on rocker lever assembly
(Figure 1, Item 3).
3. Repeat steps 1 and 2 to release spring tension on other rocker lever assemblies (Figure 1, Item 3) being
removed.
