TM 5-3895-385-23-2
0326
Rocker Lever Assembly Removal -- Continued.
Figure 2. Rocker Lever Assembly -- Removal.
CAUTION
Tag and label all rocker lever assemblies and valve bridges prior to removal. Rocker lever
assemblies and valve bridges must be installed correctly for proper operation. Failure to comply
may cause damage to equipment.
4. Remove two screws (Figure 2, Item 1) and two rocker lever assemblies (Figure 2, Item 5) from cylinder head
(Figure 2, Item 2).
5. Remove two valve bridges (Figure 2, Item 4) from valve springs (Figure 2, Item 3).
6. Repeat steps 4 and 5 to remove other rocker lever assemblies (Figure 2, Item 5) and valve bridges (Figure 2,
Item 4) if required.
END OF TASK
