TM 5-3895-373-34
2.29
REPLACE/REPAIR PUMP DRIVE GEARBOX - Continued.
F.
ASSEMBLE - Continued.
i.
Install gears (28) into pump drive gearbox
(11).
Uncured
gasket
sealing
compound
can
cause eye damage or skin irritation. Avoid
contact with eyes and skin. If compound
contacts eyes, flush eyes with water for 15
minutes
and
get
immediate
medical
attention. If sealing compound contacts
skin, remove from skin with a dry cloth or
paper towel and wash thoroughly with soap
and water. Sealing compound releases
acetic acid while curing. Use with adequate
ventilation.
j.
Apply
a
coating
of
gasket
sealing
compound to cover plate mounting surface
of pump drive gearbox.
k.
Align matchmarks and install cover plates
(26) onto pump drive gearbox (11).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses when
using.
Avoid
contact
with
eyes.
If
compound contacts eyes, flush eyes with
water and get immediate medical attention.
l.
Coat threads of hex head cap screws (27)
with thread locking compound.
m.
Install hex head cap screws (27) using
socket wrench adapter. Tighten to 85 lb-ft
(115 N•m).
Pipe sealant can cause eye damage or skin
irritation. Wash after skin contact. Wear
safety goggles/glasses when using. Avoid
contact with eyes or skin. If sealant contacts
eyes,
flush
eyes
with
water
and
get
immediate medical attention.
n.
Apply pipe sealant to pipe thread end of
elbow (12) that will be installed into pump
drive gearbox (11). Install elbow into pump
drive gearbox. Orient to direction shown.
Refer to illustration.
GO TO NEXT PAGE
2-388
