TM 5-3895-373-34
A.
REMOVE - Continued.
All personnel must stand clear during
lifting operation. Do not allow pump
drive gearbox to swing while hanging
from overhead hoist. A swinging or
shifting load may cause injury or
death to personnel.
i.
With the help of another person, pull pump
drive gearbox away from engine and onto
cribbing.
j.
Remove drive shaft (24) from drive plate
(25) or pump drive gearbox (11).
4.
REMOVE PUMP DRIVE GEARBOX FROM
ENGINE COMPARTMENT.
a.
Lift pump drive gearbox (11) slowly from
cribbing and out of engine compartment
through front top right access door.
b.
Set pump drive gearbox (11) down on clean
work surface with hydraulic pump openings
facing up.
c.
Remove hex head screw caps (19) from
pump drive gearbox (11).
GO TO NEXT PAGE
2-383
