TM 5-3895-373-34
G.
INSTALL - Continued.
3.
INSTALL CHARGE FILTER
MOUNTING
BRACKET, AIR CLEANER, AND HYDRAULIC
CHARGE FILTERS ONTO PAVING MACHINE
FRAME.
a.
Turn charge filter mounting bracket (3), air
cleaner (2), and hydraulic charge filters (1)
sideways and lower into place aligning mounting
holes in mounting bracket with holes in paving
machine frame.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
b.
Coat threads of socket head cap screws (7) with
thread locking compound.
c.
Install and tighten socket head cap screws (7),
flat washer (6), lockwasher (5), and hex nut (4).
NOTE
FOLLOW-ON-TASKS: Install propulsion pump per paragraph 2.30.
Install auxiliary vibration pump per paragraph 2.43.
Install auxiliary pump per paragraph 2.42.
Fill pump drive gearbox with gear oil per TM 5-3895-373-12.
Install engine access cover per TM 5-3895-373-20.
Install right access cover per TM 5-3895-373-10.
Close right access door per TM 5-3895-373-10.
Close front top right access door per TM 5-3895-373-10.
Close front top left access door per TM 5-3895-373-10.
END OF TASK
2-393
