TM 5-3895-373-34
2.29
REPLACE/REPAIR PUMP DRIVE GEARBOX - Continued.
G.
INSTALL - Continued.
2.
INSTALL PUMP DRIVE GEARBOX ONTO
ENGINE.
Anti-seize compound can cause eye damage.
Wear safety goggles/glasses when using.
Avoid contact with eyes. If compound
contacts eyes, flush eyes with water and get
immediate medical attention.
a.
Coat gear teeth of drive shaft (24) with anti-
seize compound.
b.
Install drive shaft (24) into pump drive
gearbox (11).
c.
Using chain hoist, position pump drive
gearbox (11) so drive shaft (24) aligns with
drive plate (25).
d.
Insert drive shaft (24) into drive plate (25)
while pushing pump drive gearbox (11)
toward engine. A slight rotation of drive
shaft may be required to align splines.
e.
Install lockwashers (21) onto hex head cap
screws (20).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses when
using.
Avoid
contact
with
eyes.
If
compound contacts eyes, flush eyes with
water and get immediate medical attention.
f.
Apply thread locking compound to threads
of hex head cap screws (20).
g.
Align pump drive gearbox mounting holes
with flywheel housing (34) and install hex
head cap screws (20). Tighten to 37 lb-ft
(50 N•m).
GO TO NEXT PAGE
2-390
