TM 5-3895-373-34
2.29
REPLACE/REPAIR PUMP DRIVE GEARBOX - Continued.
C.
CLEAN - Continued.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
2.
CLEAN
FASTENERS,
PARTS,
AND
THREADED HOLES TREATED WITH THREAD
LOCKING
COMPOUND
WITH
THREAD
LOCKING COMPOUND SOLVENT.
a.
Clean all hex head cap screws with thread
locking compound solvent.
b.
Dry fasteners and holes with a clean, lint-
free cloth.
D.
INSPECT.
1.
INSPECT BALL BEARINGS.
a.
Turn ball bearings by hand.
b.
If ball bearings turn rough or do not spin
freely, remove and replace ball bearings.
Refer to repair step E for ball bearing
removal.
2.
INSPECT GEAR TEETH.
a.
Inspect gear (32) teeth surface A for
pointed or damaged teeth.
b.
Replace gears if pointed or damaged teeth
are found.
E.
REPAIR.
1.
USE A BEARING PULLER FROM UNIVERSAL
PULLER KIT TO REMOVE BALL BEARINGS
FROM GEARS. DISCARD ANNULAR BALL
BEARINGS.
2.
USE
HYDRAULIC
PRESS
FRAME
AND
UNIVERSAL PULLER KIT TO PRESS NEW
BALL BEARINGS ON GEAR.
GO TO NEXT PAGE
2-386
