TM 5-3895-373-34
2.69
REPLACE/REPAIR AUGER/CONVEYOR MOTOR AND DRIVE SPROCKET WHEEL- Continued.
F.
INSTALL - Continued.
3.
INSTALL TOP CHAIN COVER PLATE AND
ELBOWS.
NOTE
Hydraulic hoses routed over the top
of the top chain cover plate may have
to be repositioned temporarily to gain
access to hex head cap screws and
to allow installation of the top chain
cover plate.
a.
Place top chain cover plate (47) over drive
sprocket
wheels
and
position
over
mounting holes.
b.
Install flat washers (46) onto hex head cap
screws (45).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound to threads
of hex head cap screws (45).
d.
Install and tighten hex head cap screws
(45) into top chain cover plate (47). Tighten
to 37 lb-ft (50 N•m).
GO TO NEXT PAGE
2-1000
