TM 5-3895-373-34
2.69
REPLACE/REPAIR AUGER/CONVEYOR MOTOR AND DRIVE SPROCKET WHEEL - Continued.
F.
INSTALL - Continued.
NOTE
Perform steps 7 and 8 if installing left
auger/conveyor motor. Go to step 9
if
installing
right
auger/conveyor
motor.
7.
CONNECT LEFT SIDE SCREED BURNER
FUEL
LINE,
AND
SCREED
HYDRAULIC
HOSES
AND
TUBE
TO
STRAIGHT
ADAPTERS.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Apply hydraulic fitting sealant to threads of
left side rear tractor straight adapters (107
through 111).
b.
Cut tie wraps securing fuel and hydraulic
hoses together and tie wrap securing
screed travel lock hose (24).
c.
Reconnect screed burner fuel hose (23) to
straight adapter (109).
d.
Reconnect screed travel lock valve hose
(24) and tube (25) to straight adapters (110
and 111).
e.
Reconnect screed extension cylinder retract
hose (26) and extend hose (27) to straight
adapters (107 and 108).
GO TO NEXT PAGE
2-1004
