TM 5-3895-373-34
F.
INSTALL - Continued.
2.
ALIGN AUGER/CONVEYOR DRIVE SPROC-
KET
WHEEL
WITH
AUGER
SPROCKET
WHEEL AND CONVEYOR SPROCKET WHEEL
IN THE AUGER/ CONVEYOR DRIVE SYSTEM
AND CONNECT AUGER/CONVEYOR DRIVE
CHAIN.
a.
Loosen set screws (52) in drive sprocket
wheel
(53)
and
position
to
place
auger/conveyor drive chain (48) onto drive
sprocket wheel.
b.
Lay the edge of a steel machinist’s rule
against inside of conveyor sprocket wheel
(98) and align position of drive sprocket
wheel (53) with the straightedge. Tighten
drive sprocket wheel set screws.
c.
Check this position by checking alignment
with auger sprocket wheel (99) and drive
sprocket wheel (53) with a second steel
machinist’s rule.
d.
Connect auger/conveyor drive chain per
paragraph 2.63, step C.2.
e.
Make any adjustments necessary to align
drive sprocket wheel (53) with conveyor
sprocket wheel (98) and auger sprocket
wheel (99) to ensure auger/conveyor drive
chain runs evenly and smoothly.
GO TO NEXT PAGE
2-999
