TM 5-3895-373-34
2.69
REPLACE/REPAIR AUGER/CONVEYOR MOTOR AND DRIVE SPROCKET WHEEL - Continued.
F.
INSTALL - Continued.
NOTE
Perform steps 5 and 6 if installing
right auger/conveyor motor. Go to
step 7 if installing left auger/conveyor
motor.
5.
CONNECT SCREED EXTENSION CYLINDER
RETURN
LINE
TO
RETURN
MANIFOLD.
CONNECT SCREED VIBRATION SOLENOID
VALVE
TUBE
TO
SCREED
VIBRATION
SOLENOID VALVE.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Apply hydraulic fitting sealant to threads of
tee (100) and elbow (101).
b.
Connect screed extension cylinder return
line tube (30) to return manifold.
c.
Connect screed vibration solenoid valve
tube (31) to screed vibration solenoid valve
mounted on return manifold.
GO TO NEXT PAGE
2-1002
