TM 5-3895-373-34
F.
INSTALL - Continued.
8.
INSTALL INBOARD BATTERY.
a.
Place battery and battery box (22) into
battery compartment. Ensure battery box
holddown strap (13) is not twisted. Make
sure terminals are oriented the same as
outboard battery.
b.
Reconnect jumper battery cable (21) to
positive terminal of outboard battery and to
negative terminal of inboard battery.
c.
Install battery nuts (20).
When connecting batteries, connect positive
battery cable before connecting negative
battery cable. Failure to connect batteries in
the proper sequence may lead to electrical
shock or short circuit and result in severe
personnel injury.
d.
Reconnect positive battery cable (19) and
battery nut (17) to positive terminal of
inboard battery.
e.
Reconnect negative battery cable (18) and
battery nut (17) to negative terminal of
outboard battery.
Electrical insulating varnish fumes can be
harmful if inhaled. Use only in a well
ventilated area. Avoid prolonged exposure
to fumes. If personnel become dizzy or
drowsy during use, get immediate medical
attention.
f.
Apply
electrical
insulating
varnish
to
terminals of battery and cover terminals
with battery terminal caps (16).
g.
Install panels (15).
h.
Install battery box covers (14) and buckle
battery box holddown straps (13) on both
batteries.
GO TO NEXT PAGE
2-1005
