TM 5-3895-373-34
B.
DISASSEMBLE - Continued.
4.
REMOVE VALVE PLATE, VALVE DRIVE SHAFT,
GEAR SET, AND MULTIPLE GEAR SHAFT FROM
BEARING HOUSING AND SHAFT ASSEMBLY.
a.
Remove valve plate (76).
b.
Remove and discard preformed packing (77).
c.
Lift valve drive shaft (78) out of gear set (79).
NOTE
The gear set rollers may be loose
when
removing
gear
set
from
multiple gear shaft. Retain gear set
rollers in gear set outer ring if loose.
Do not lose gear set rollers.
d.
Remove gear set (79). Ensure gear set rollers
are retained in gear set outer ring if loose.
e.
Remove and discard preformed packings (80).
f.
Remove multiple gear shaft (81).
g.
Remove preformed packing (82) from bearing
housing and shaft assembly (83). Discard
preformed packing.
GO TO NEXT PAGE
2-981
