TM 5-3895-373-34
2.69
REPLACE/REPAIR AUGER/CONVEYOR MOTOR AND DRIVE SPROCKET WHEEL - Continued
D.
INSPECT - Continued.
4.
INSPECT GEAR SET.
a.
Inspect gear set (79), gear rollers E, for
contamination, looseness, and wear. Replace
gear set if rollers are worn.
b.
Inspect valve internal gear, splines F, for
sharpened, chipped, or broken gear splines.
Replace gear set if gear splines are damaged.
5.
INSPECT SHAFT COUPLING ASSEMBLY (92).
REPLACE SHAFT COUPLING ASSEMBLY IF
BEARINGS G DO NOT SPIN FREELY, OR
EXHIBIT RADIAL FREE PLAY.
6.
INSPECT SPLINES H OF VALVE DRIVE SHAFT
(78) AND MULTIPLE GEAR SHAFT (81) FOR
NICKS, CHIPS, OR BURRS. REPLACE PARTS IF
DAMAGE IS FOUND.
GO TO NEXT PAGE
2-986
