TM 5-3895-373-34
C.
CLEAN.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
Im cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
CLEAN ALL METAL PARTS WITH CLEANING
SOLVENT.
a.
Rinse all metal parts in cleaning solvent. Do not
submerse shaft coupling assembly bearing in
cleaning solvent.
b.
Use a cleaning brush to remove foreign material
and debris from exterior auger/conveyor motor
parts. Rinse with cleaning solvent.
c.
Flush dirt
and
foreign
material
from
fluid
passages in valve housing, bearing housing,
valve plate, and gear set.
d.
Use a lint-free cloth to wipe away dirt from seal
and packing grooves.
e.
Dry all parts with a clean, lint-free cloth.
GO TO NEXT PAGE
2-983
