TM 5-3895-373-34
2.69
REPLACE/REPAIR AUGER/CONVEYOR MOTOR AND DRIVE SPROCKET WHEEL - Continued
C.
CLEAN - Continued.
2.
CLEAN
ALL
FASTENERS
WITH
THREAD
LOCKING COMPOUND SOLVENT.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles when cleaning fasteners with
locking compound solvent. If solvent
contacts eyes, flush with water and
get immediate medical attention.
a.
Clean hex head cap screws and socket head
cap screws with thread locking compound
solvent.
b.
Dry all fasteners with a clean, cleaning cloth.
D.
INSPECT.
1.
INSPECT BEARING HOUSING.
a.
Inspect bearing housing (87) shaft face seal,
groove A, for scratches, nicks, and burrs.
b.
Replace bearing housing (87) if scratches, nicks,
and burrs cannot be removed with emery cloth.
c.
Inspect surface B for scoring. Replace if
scratches cannot be removed with emery cloth.
GO TO NEXT PAGE
2-984
