TM 5-3895-373-20
7.17.
REPLACE DCA AND PRESSURE TRANSMITTERS - Continued.
B.
INSTALL.
1.
INSTALL BRACKET, DCA HOUSING,
AND TERMINAL BOARD.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Clean bolts (32) with thread locking
compound solvent. Wipe bolts dry with
cleaning cloth.
b.
Position bracket (35) against
engine
cowling and secure in place with lock
screws (37) and self-locking nuts (36).
c.
Position DCA housing (34) on bracket
(35), in line with mounting holes.
d.
Install flat washers (33) on bolts (32).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
e.
Coat threads of bolts (32) with thread
locking compound.
f.
Install bolts (32). Tighten to 11 lb-ft (15
Nm).
g.
Install machine screws (28) and terminal
board (29).
h.
Place equipment panel (31) inside of DCA
housing (34). Install and tighten two
machine screws (30) in opposite corners
of housing.
GO TO NEXT PAGE
7-126