TM 5-3895-373-20
B.
INSTALL Continued.
4.
INSTALL TURBOSUPERCHARGER OUTPUT
PRESSURE
TRANSMITTER
AND
AIR
PRESSURE TRANSMITTER.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
flush
eyes
with
water
and
get
immediate medical attention.
a.
Apply pipe sealant to threads of pressure
transmitters (38 and 39).
b.
Install
turbosupercharger
output
pressure
transmitter (38) in pipe reducer (40). Snug up,
but do not overtighten pressure transmitter.
c.
Install air pressure transmitter (39) in pipe
reducer (41). Snug up, but do not overtighten
pressure transmitter.
d.
Apply
electrical
insulating
compound
to
connector plugs of pressure transmitters (38 and
39). Plug connector plugs into mating DCA
harness connectors.
e.
Install tie wraps as needed to secure harness
components.
GO TO NEXT PAGE
7-129
