TM 5-3895-373-20
7.17.
REPLACE DCA AND PRESSURE TRANSMITTERS - Continued.
A.
REMOVE - Continued.
5.
REMOVE
OIL
PRESSURE
TRANSMITTER AND OIL FILTER
DIFFERENTIAL
PRESSURE
TRANSMITTER.
Do not remove engine oil line fittings
while engine oil is hot. Oils can burn
when in contact with very hot
surfaces or if ignited when released
as a spray. Keep ignition sources
away. Provide adequate ventilation.
Wear protective clothing/ equipment.
a.
Allow engine to cool before disconnecting
oil pressure transmitter (42) and oil filter
differential pressure transmitter (43).
b.
Place machinery wiping towel below oil
filter.
c.
Tag and unplug oil pressure transmitter
(42) from DCA harness.
d.
Remove oil pressure transmitter (42) and
plug opening in mating tee to prevent
contamination.
e.
Tag
and
unplug
oil
filter
differential
pressure transmitter (43) from DCA
harness.
f.
Tag and disconnect hoses (44 and 45)
from
oil
filter
differential
pressure
transmitter (43). Plug hoses to prevent
contamination.
g.
Remove hex head cap screws (46) and
flat washers (47). Remove oil filter
differential pressure transmitter (43).
Discard lockwashers.
h.
Place
oil
filter
differential
pressure
transmitter (43) in a bench vise. Remove
elbow (48) and straight adapter (49) from
oil filter differential pressure transmitter.
i.
Wipe up oil spillage with cleaning cloths.
Leave machinery wiping towel in place.
GO TO NEXT PAGE
7-122
