TM 5-3895-373-20
A.
REMOVE - Continued.
3.
REMOVE SCREED ARM.
a.
Remove socket head cap screw (32) and
retainer (33).
b.
Use drive pin punch to drive out pivot pin (34).
Tow arm is heavy and falls when
screed arm is removed. Use another
person to support tow arm during
removal of screed arm. Failure to do
so could result in serious injury to
personnel or damage to equipment.
c.
With help of another person, remove hex head
cap screws (35), flat washers (36), and screed
arm (37).
d.
Use drive pin punch to remove sleeve bushings
(38) from main screed pivot bores (39). Discard
sleeve bushings.
4.
DISASSEMBLE UNIVERSAL JOINT.
a.
Put matchmarks on universal joint yokes (40 and
41). Remove lubrication fitting (42). Discard
lubrication fitting.
GO TO NEXT PAGE
15-23