15.3. REPLACE THICKNESS CONTROL COMPONENTS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1042

TM 5-3895-373-20 15.3. REPLACE THICKNESS CONTROL COMPONENTS. This task covers: a. Remove b. Clean c. Install INITIAL SETUP Tools: Personnel Required: General mechanic’s automotive tool kit Two 62B construction equipment repairers. Second person (Item 54, Appendix E) needed to help with removal and installation of screed arm. Bench vise (Item 55, Appendix E) Drive pin punch set (Item 35, Appendix E) References: Hex head driver socket (Item 41, Appendix E) TM 5-3895-373-10 Plastic hammer (Item 20, Appendix E) TM 5-3895-373-24P Socket wrench adapter (Item 2, Appendix E) Torque wrench, 0 to 600 lb-ft (Item 67, Appendix E) Equipment Condition: Torque wrench, 0 to 175 lb-ft (Item 68, Appendix E) Paving machine and screed sitting on flat surface per Torque wrench, 5 to 150 lb-in (Item 69, Appendix E) TM 5-3895-373-10. Universal puller kit (Item 31, Appendix E) Extension screeds fully extended per TM 5-3895-373-10. Wire scratch brush (Item 6, Appendix E) Materials/Parts: Cleaning cloth (Item 7, Appendix C) Cleaning solvent (Item 24, Appendix C) Grease (Item 15, Appendix C) Thread locking compound (Item 13, Appendix C) Thread locking compound (Item 12, Appendix C) Thread locking compound solvent (Item 25, Appendix C) Bearing assemblies Cotter pins Lockwashers Lubrication fittings Plain encased seals Retaining rings Sleeve bushings Spider Spring pins Tapered cones and rollers GO TO NEXT PAGE 15-20

Privacy Statement
Press Release
Contact