4. INSTALL BATTERY CABLES

15.2. REPLACE SCREED CONTROL BOX- Continued

15.3. REPLACE THICKNESS CONTROL COMPONENTS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1041

TM 5-3895-373-20 C. INSTALL - Continued. 3. INSTALL SCREED CONTROL BOX PROTECTIVE COVER PER TM 5-3895-373-10. 4. INSTALL BATTERY CABLES. When connecting batteries, connect positive battery cable before connecting negative battery cable. Failure to connect batteries in the proper sequence may lead to electrical shock or short circuit and result in personnel injury. a. Reconnect positive battery cable (6) and battery nut (4) to positive terminal of inboard battery. b. Reconnect negative battery cable (5) and battery nut (4) to negative terminal of outboard battery. Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. c. Apply electrical insulating varnish to terminals on batteries. d. Install rubber battery terminal caps (3) onto battery terminals. e. Install battery box covers (2) on both batteries and buckle battery box holddown straps (1). END OF TASK 15-19

Privacy Statement
Press Release
Contact