TM 5-3895-385-23-2
0415
Conveyor Rear Axle Assembly Removal
Figure 1. Conveyor Rear Axle Assembly -- Removal/Installation.
1. Remove two grease lines (Figure 1, Item 1) from grease fittings (Figure 1, Item 7) by pressing in fitting end
and removing grease line.
2. Remove bolt (Figure 1, Item 12) and lock washer (Figure 1, Item 11) from sprocket (Figure 1, Item 13).
Discard lock washer.
3. Remove four bolts (Figure 1, Item 10) and lock washers (Figure 1, Item 9) from conveyor mounting plate
(Figure 1, Item 14). Discard lock washers.