TM 5-3895-385-23-2
0414
Conveyor Floor Assembly Installation -- Continued.
4. Install eight bolts (Figure 3, Item 11), new lock washers (Figure 3, Item 12), and flat washers (Figure 3, Item
13) onto four brackets (Figure 3, Item 3).
5. Install four bolts (Figure 3, Item 14), new lock washers (Figure 3, Item 15), and flat washers (Figure 3, Item
16) into forward bracket (Figure 3, Item 1).
6. Install three bolts (Figure 3, Item 5), six flat washers (Figure 3, Items 6 and 8), three new lock washers (Figure
3, Item 9), nuts (Figure 3, Item 10), and roller bracket (Figure 3, Item 7) onto mounting point (Figure 3, Item
4).
END OF TASK
FOLLOW-ON TASK
1. Install conveyor rear axle assembly (WP 0415).
2. Install conveyor idler assembly (WP 0416).
3. Install conveyor covers (WP 0418).
END OF TASK
END OF WORK PACKAGE
0414-7/8 blank
