TM 5-3895-385-23-2
0333
Intake Manifold Pressure/Temperature Sensor and Barometric Pressure Sensor Removal (Method 2)
Figure 3. Method 2 Sensor -- Removal/Installation.
NOTE
Method 2 applies to both the intake manifold pressure/temperature sensor and the barometric
pressure sensor. Instructions for removal of the intake manifold pressure/temperature sensor are
listed below. Steps are the same for the barometric pressure sensor unless otherwise noted.
Intake manifold temperature sensor shown.
1. Disconnect wiring harness (Figure 3, Item 3) from sensor (Figure 3, Item 2).
2. Remove mounting bolt (Figure 3, Item 1) and sensor (Figure 3, Item 2) from engine (Figure 3, Item 4).
END OF TASK