TM 5-3895-385-23-2
0333
Coolant Temperature Sensor and Oil Pressure Switch Removal (Method 1)
Figure 2. Method 1 Sensor -- Removal/Installation.
NOTE
Method 1 applies to both the coolant temperature sensor and the oil pressure switch. Instructions
for removal of the coolant temperature sensor are listed below. The steps are the same for the oil
pressure switch unless otherwise noted. The coolant temperature sensor is shown.
1. Disconnect wiring harness (Figure 2, Item 1) from sensor (Figure 2, Item 2).
2. Remove sensor (Figure 2, Item 2) with O-ring (Figure 2, Item 3) from engine (Figure 1, Item 4). Discard O-
ring.
END OF TASK