TM 5-3895-385-23-2
0333
Intake Manifold Pressure/Temperature Sensor and Barometric Pressure Sensor Installation (Method 2)
NOTE
Method 2 applies to both the intake manifold pressure/temperature sensor and the barometric
pressure sensor. Instructions for installation of the intake manifold pressure/temperature
sensor are listed below. Steps are the same for the barometric pressure sensor unless
otherwise noted. Intake manifold temperature sensor shown.
There is no provision for adjustment of the intake manifold temperature sensor.
1. Install mounting bolt (Figure 3, Item 1) and sensor (Figure 3, Item 2) to engine (Figure 3, Item 4).
2. Connect wiring harness (Figure 3, Item 3) to sensor (Figure 3, Item 2).
END OF TASK
