TM 5-3895-373-34
B.
CLEAN - Continued.
2.
CLEAN FASTENERS TREATED WITH THREAD
LOCKING COMPOUND.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Remove set screws from sprocket wheel. Clean
set screws with thread locking compound
solvent. Wipe dry with a clean, cleaning cloth
and reinsert set screws into sprocket wheel.
b.
Remove set screw from bearing unit. Clean set
screw with cleaning solvent. Wipe dry with a
cleaning cloth.
Reinsert set screw into bearing unit.
c.
Clean outer lubrication tube hex head cap
screws, bearing mount hex head cap screws,
inner lubrication pipe hex head cap screws, inner
bearing unit hex head cap screws, and outer
bearing unit hex head cap screws with thread
locking compound solvent. Wipe dry with a
clean, cleaning cloth.
GO TO NEXT PAGE
2-961
