TM 5-3895-373-34
2.68
REPLACE AUGER BEARING UNITS, SHAFT, AND SPROCKET WHEEL.
This task covers:
a. Remove
b. Clean
c. Inspect
d. Install
INITIAL SETUP:
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person
(Item 106, Appendix D)
needed to lift bearing mount and shaft.
Hydraulic press (Item 41, Appendix D)
Level and plumb (Item 54, Appendix D)
References:
Outside micrometer (Item 16, Appendix D)
LO 5-3895-373-12
Retaining ring pliers (Item 65, Appendix D)
TM 5-3895-373-20
Slide caliper (Item 20, Appendix D)
TM 5-3895-373-24P
Socket wrench adapter (Item 6, Appendix D)
Torque wrench, 0 to 175 lb-ft (Item 132, Appendix D)
Equipment Condition:
Torque wrench, 100 to 500 lb-ft (Item 133, Appendix D)
Remove screed per TM 5-3895-373-20.
Wire scratch brush (Item 13, Appendix D)
Remove auger flights per TM 5-3895-373-20.
Remove auger/conveyor drive chain per 2.63.
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
Grease (Item 18, Appendix B)
Sealing compound (Item 30, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Lockwashers
GO TO NEXT PAGE
2-957
