TM 5-3895-373-34
2.67
REPLACE MAIN SCREED FRAME - Continued.
D.
INSTALL - Continued.
j.
Rotate drive shafts (3) by hand to place
eccentric weights in the bottom position prior to
connecting shafts with universal joint (2). Drive
shafts must remain in this position to ensure
proper alignment of eccentric shaft weights.
WARNING
Anti-seize compound can cause eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
k.
Apply anti-seize compound to the ends of drive
shafts (3).
l.
Position
universal
joint
between
vibrator
housings (7).
m.
Install universal joint (2) onto drive shafts (3).
Align pin holes of universal joint and drive shafts.
n.
Install spring pins (1).
o.
Lubricate universal joint per LO 5-3895-373-12.
13.
INSTALL MAIN SCREED VIBRATION MOTOR
PER TM 5-3895-373-20.
NOTE
FOLLOW-ON-TASKS: Install extension screed frames per paragraph 2.66.
Install main screed plate per paragraph 2.71.
Install strikeoff components per TM 5-3895-373-20.
Install screed extension cylinder per TM 5-3895-272-20.
Install screed tow arm per TM 5-3895-373-20.
Install screed per TM 5-3895-373-20.
Align main and extension screed plates per TM 5-3895-373-20.
END OF TASK
2-956
