TM 5-3895-373-34
D.
INSTALL - Continued.
12.
INSTALL
MAIN
SCREED
VIBRATOR
COMPONENTS.
a.
Insert assembled drive shaft (11) into vibrator
housing (7).
b.
Install lockwasher (9) onto socket head cap
screw (8).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound
(Item
13,
Appendix B) to threads of socket head cap
screw (8).
d.
Install retainer plate (10) onto end of drive shaft
(3).
e.
Install socket head cap screws (8). Tighten
socket head cap screws to 42 Ib-ft (57 N.m)
using a hex head driver socket and socket
wrench adapter.
f.
Install lockwasher (5) onto socket head cap
screw (4).
g.
Apply thread locking compound
(Item
13,
Appendix B) to threads of socket head cap
screw (4).
h.
Position motor mount (6) over drive shaft (3) in
vibrator housing (7).
i.
Install socket head cap screws (4). Tighten
socket head cap screws to 42 lb-ft (57 N.m)
using a hex head driver socket and socket
wrench adapter.
GO TO NEXT PAGE
2-955
