TM 5-3895-373-34 2.59 REPLACE HOPPER WING - Continued. B. INSTALL - Continued. 4. INSTALL  FLASHING,  CONVEYOR    ACCESS DOOR, AND EXTENSION BRACKET. WARNING Thread    locking    compound    solvent can  cause  eye  damage.    Wear  safety goggles/glasses  when  using.    Avoid contact with eyes.  If solvent contacts eyes,  flush  eyes  with  water  and  get immediate medical attention. a. Remove    thread    locking    compound    from    cap screws (11 and 14) with thread locking compound solvent. b. Dry parts with a clean, cleaning cloth. c. Install   flat   washers   (15)   onto   hex   head   cap screws (14). WARNING Thread locking  compound  can  cause eye damage. Wear safety goggles/glasses  when  using.    Avoid contact    with    eyes.        If    compound contacts  eyes,  flush  eyes  with  water and get immediate medical attention. d. Apply thread locking compound to threads of hex head cap screws (14). e. With   the   help   of   a   second   person   supporting extension   bracket   (13)   in   position,   install   hex head  cap  screws  (14).    Do  not  tighten  at  this time. f. Apply   thread   locking   compound   to   threads   of socket head cap screws (11). g. Align  conveyor  access  door  (12)  onto  extension bracket (13) and install socket head cap screws (11). h. Evenly tighten socket head cap screws (11) and hex   head   cap   screws   (14)   to   ensure   proper alignment.    Tighten  cap  screws  (14)  to  59  Ib-ft (80 N.m). i. Tighten  socket head cap screws (11) to  19 Ib-ft (26 N.m) using hex head socket driver. GO TO NEXT PAGE 2-820