TM 5-3895-373-34
A.
REMOVE - Continued.
5.
REMOVE HOPPER WING.
WARNING
All personnel must stand clear during
lifting operations. Do not allow
hopper wing to swing while hanging
from overhead hoist. Equipment may
strike personnel and cause injury.
a.
With the help of another person, to steady
hopper wing (18), raise overhead hoist until
hopper wing clears paving machine.
b.
Transport hopper wing (18) to temporary storage
or repair area.
c.
Disconnect chain assemblies (21) and remove
C-clamps (20).
B.
INSTALL.
1.
INSTALL HOPPER WING.
a.
Attach two C-clamps (20) 1 ft (0,3 m) from each
end of hopper wing (18). Tighten clamps
securely to prevent slippage.
WARNING
Hopper wing weighs 875 lbs (397 kg).
To avoid personal injury, ensure all
chains
and
hooks
are
in
good
condition and are of correct capacity.
Ensure overhead hoist is in good
working condition and hooks are
positioned correctly. Lifting hooks
must not be side loaded. Damage to
equipment and personnel injury may
result from unexpected movement of
hopper wing.
b.
Connect chain assemblies (21) to C-clamps
(20).
c.
Attach overhead hoist to chain assemblies (21).
GO TO NEXT PAGE
2-817
