TM 5-3895-373-34
2.60
REPAIR HOPPER LIFT CYLINDER - Continued.
A.
DISASSEMBLE - Continued.
CAUTION
Do not clamp chrome surface of
piston rod in vise. Damage to
chrome surface of piston rod can
result from contact with steel vise
jaws.
b.
Clamp head end of piston rod (4) in bench vise
using vise jaw caps.
c.
Remove self-locking hex nut (6). Discard self-
locking hex nut.
d.
Remove piston (7) and preformed packing (8).
Discard preformed packing.
e.
Remove sleeve spacer (9) and cylinder head (1).
f.
Remove piston rod (4) from bench vise.
CAUTION
Use caution when removing seals
and preformed packings. Do not use
excessive force. Use an o-ring tool.
Careless removal of packings and
seals can result in bypass leakage
and equipment failure.
g.
Use an o-ring tool to remove packing retainers
(10) and seal (11) from piston (7). Discard seal
and packing retainers.
GO TO NEXT PAGE
2-824
