TM 5-3895-373-34
A.
DISASSEMBLE - Continued.
1.
REMOVE RETAINING RING.
a.
Insert spanner wrench into spanner hole on
cylinder head (1).
b.
Hold hopper lift cylinder and turn cylinder head
(1) in direction of least resistance until beveled
edge of retaining ring (2) appears in milled
opening (3).
c.
Insert flat blade screwdriver under beveled edge
of retaining ring (2).
d.
Rotate cylinder head (1) in opposite direction of
step b to force until retaining ring (2) emerges
through milled opening (3).
e.
Continue to rotate cylinder head (1) and pull
retaining ring (2) from milled opening (3).
2.
REMOVE PISTON COMPONENTS.
a.
Pull piston rod (4) and attached parts from
cylinder tube (5).
GO TO NEXT PAGE
2-823
