TM 5-3895-373-34
A.
DISASSEMBLE - Continued.
CAUTION
Use caution when removing seals
and o-rings. Do not use excessive
force. Use an o-ring tool. Careless
removal of o-rings and seals can
result
in
bypass
leakage
and
equipment failure.
h.
Use an o-ring tool to remove o-ring (12) and
packing retainer (13). Discard o-ring and
packing retainer.
i.
Remove ring wiper (14) and compression cup
(15) from inside of cylinder head (1). Discard
ring wiper and compression cup.
B.
CLEAN.
1.
CLEAN ALL METAL PARTS.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
Im cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
2.
RINSE PISTON ROD (4), CYLINDER HEAD
(1), PISTON (7), CYLINDER TUBE (5), AND
SLEEVE SPACER (9) WITH CLEANING
SOLVENT.
GO TO NEXT PAGE
2-825
