TM 5-3895-373-34
B.
CLEAN.
1.
CLEAN
TRACK
IDLER
ROLLER
ASSEMBLY
COMPONENTS.
Cleaning solvent, P-D-680, is TOXIC
and
flammable.
Wear
protective
goggles and gloves. Use only in a well
ventilated area. Avoid contact with skin,
eyes, and clothes, and do not breathe
vapors. Keep away from heat or flame.
Never smoke when using solvent; the
flashpoint for Type III cleaning solvent is
200°F (93,3°C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while using
cleaning solvent, immediately get fresh
air and medical help. If solvent contacts
skin or clothes, flush with cold water. If
solvent contacts eyes, flush eyes with
water and get immediate medical
attention.
a. Clean all components with cleaning solvent and
cleaning cloth.
b. Use a cleaning brush to remove buildup
deposits.
2.
CLEAN HEX HEAD CAP SCREWS AND SET
SCREWS.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a. Clean threads of set screws and hex head cap
screws with thread locking compound solvent.
b. Wipe threads dry with a cleaning cloth.
GO TO NEXT PAGE
2-509
