2.36 REPLACE/REPAIR TRACK IDLER ROLLER ASSEMBLY

TM-5-3895-373-34 Paving Machine Bituminous Material Crawler Mounted Diesel Engine Driven Manual
Page Navigation
530

TM 5-3895-373-34 2.36 REPLACE/REPAIR TRACK IDLER ROLLER ASSEMBLY. This task covers: a. Disassemble b. Clean c. Inspect d. Assemble INITIAL SETUP Tools: Personnel Required: General mechanic’s automotive tool kit Two 62B construction equipment repairers. Second person (Item 106, Appendix D) needed to help move track idler roller assembly. C-clamp (Item 30, Appendix D) Chain assembly (Item 29, Appendix D) References: Cleaning brush (Item 12, Appendix D) LO 5-3895-373-12 Crowbar (Item 35, Appendix D) TM 5-3895-373-20 Hex head driver socket (Item 84, Appendix D) TM 5-3895-373-24P Slide caliper (Item 20, Appendix D) Sling strap (Item 98, Appendix D) Equipment Condition: Socket wrench adapter (Item 6, Appendix D) Paving machine jacked and cribbed (for track maintenance) Socket wrench adapter (Item 7, Appendix D) per TM 5-3895-373-20. Torque wrench, 0 to 175 Ib-ft (Item 132, Appendix D) Track chain assembly removed per paragraph 2.41. Torque wrench, 100 to 500 lb-ft (Item 133, Appendix D) Universal puller kit (Item 69, Appendix D) Materials/Parts: Cleaning cloth (Item 6, Appendix B) Cleaning solvent (Item 31, Appendix B) Emery cloth (Item 5, Appendix B) Grease (Item 18, Appendix B) Thread locking compound (Item 13, Appendix B) Thread locking compound (Item 14, Appendix B) Thread locking compound solvent (Item 32, Appendix B) Sleeve bushings Lockwashers Plain seals NOTE There is a right hand track idler roller assembly and a left hand track idler roller assembly on the paving machine. Remove the track chain assembly only from the side being worked on. The procedure for both the right and left hand track idler roller assemblies is the same. Any differences are noted in the text. The right hand track idler roller assembly is shown in the illustrations. GO TO NEXT PAGE 2-506

Privacy Statement
Press Release
Contact