TM 5-3895-373-34
2.35
REPLACE TRACK ROLLERS - Continued.
C.
CLEAN Continued.
2.
CLEAN MOUNTING HARDWARE.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Clean threads of hex head cap screws with
thread locking compound solvent.
b.
Dry threads with a cleaning cloth.
D.
INSTALL.
NOTE
Short hex head cap screws (1) and flat
washers (2) are used to secure upper
track rollers (3). Longer hex head cap
screws (4) and flat washers (5) are used
with spacers (7) on the lower track
rollers (6).
1.
INSTALL UPPER TRACK ROLLER.
a.
Install flat washers (2) onto hex head cap screws
(1).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate medical attention.
b.
Apply thread locking compound to threads of hex
head cap screws (1).
GO TO NEXT PAGE
2-504
