TM 5-3895-373-34
A.
DISASSEMBLE.
1.
REMOVE TRACK IDLER ROLLER ASSEMBLY
FROM TRACK FRAME.
The track idler roller assembly weighs
approximately 95 lbs (43 kg) and is
difficult to handle. Be careful when
sliding track idler roller assembly from
track frame. Damage to equipment and
personnel
injury
may
result
from
unexpected movement.
a.
Stack cribbing (1) under and in front of track idler
roller assembly (2). Carefully pry track idler roller
assembly out of track frame (3) using a crowbar.
Ensure sling strap is in good condition
and is of correct capacity. Failure to do
so may allow track idler roller assembly
to fall causing serious injury or death to
personnel.
b.
Place sling strap (4) around idler shaft bracket of
track idler roller assembly (2). Connect loops on
sling strap to overhead hoist hook (5).
c.
With the help of another person, transport track
idler roller assembly to workbench.
GO TO NEXT PAGE
2-507
