15. REMOVE SERVO PISTON

13. REMOVE PUMP PISTONS, SLIPPER RETAINER, AND RETAINER GUIDE

16. REMOVE SERVO SPRING FROM SERVO PISTON

TM-5-3895-373-34 Paving Machine Bituminous Material Crawler Mounted Diesel Engine Driven Manual
Page Navigation
431

TM 5-3895-373-34 B. DISASSEMBLE Continued. 15. REMOVE SERVO PISTON. a. Turn end cap housing assembly housing on side. b. Remove hex head cap screws (104) and lift brackets (105) from both ends of end cap housing assembly. c. Remove servo cover (106) and gasket (107). NOTE Servo piston (108) is screwed into servo cover (109) and will come out along with servo cover. d. Remove servo cover (109), along with servo piston (108), and gasket (107). e. Remove cap (110) and hex nut (111) from servo piston. f. Unscrew servo piston (108) from servo cover (109). g. Set servo piston (108) on clean work surface. h. Remove plugs (112). GO TO NEXT PAGE 2-407

Privacy Statement
Press Release
Contact