TM 5-3895-373-34
2.30
REPLACE/REPAIR PROPULSION PUMP - Continued.
B.
DISASSEMBLE Continued.
13.
REMOVE PUMP PISTONS, SLIPPER RETAINER,
AND RETAINER GUIDE.
a.
Remove pump pistons (97) and slipper retainer
(98) from cylinder block (99).
b.
Remove retainer guide (100), retainer (101), and
holddown pins (102).
14.
REMOVE
VALVE
PLATE
FROM
END
CAP
ASSEMBLY HOUSING.
NOTE
Valve plate is positioned onto pin inside
end cap assembly housing.
a.
Use hooked end of o-ring tool to lift valve plate
(103).
b.
Set valve plate (103) down on clean work
surface.
GO TO NEXT PAGE
2-406
