7. REMOVE COVER PLATE, A-FLANGE ADAPTER AND GEROTOR SET

TM-5-3895-373-34 Paving Machine Bituminous Material Crawler Mounted Diesel Engine Driven Manual
Page Navigation
426

TM 5-3895-373-34 2.30 REPLACE/REPAIR PROPULSION PUMP - Continued. B. DISASSEMBLE - Continued. 7. REMOVE COVER PLATE, A-FLANGE ADAPTER AND GEROTOR SET. a. If cover plate (62) is installed on propulsion pump, remove cover plate by removing hex head cap screws(63). Use caution when removing preformed packings and packing retainers. Scratched or dented seal grooves can cause bypass leakage. Do not use excessive force to remove preformed packings and packing retainers. Use an o-ring tool to remove preformed packings and packing retainers. b. Use an o-ring tool to remove preformed packing (64). c. Remove hex head cap screws (65) and A-flange adapter (66). d. Remove ring spacer (67). Discard ring spacer. e. Use an o-ring tool to remove preformed packing (68). Discard preformed packing. f. Remove gerotor cover (69). g. If necessary, remove pin (70) from gerotor cover. h. Remove gerotor set (71) and woodruff key (72). GO TO NEXT PAGE 2-402

Privacy Statement
Press Release
Contact